Application


Trapexoidal Profiles are used for widely diverse applications. Due to Large range of geometric designs, they offer variety of architectural possibility. Trapezoidal Profiles are supplied not only in different section and thickness but also various lengths and required dimensions. This profile is suitable for Roof and Wall Panels.

Trapezoidal Profiles is for industry or trade, Stadia, Cold Storage, Ware House, Airport Hanger, Railway station, Bus Stop, Under construction Building Boundaries & Architectural installation etc.

Material Specification


PRE PAINTED GALVANISED IRON (PPGI)

  • Material Confirm to : IS 277, IS 513 & IS 14246
  • Coating On : Hot Dip Galvanised Iron
  • Thickness : Standard Thickness of 0.50mm TCT
  • Zn Coating (GSM) : Zn 120
  • Paint Systems : Regular Modified Polyster Paint (RMP) Optional (SMP & PVdF)
  • Mpa : 245 Mpa
  • Primer Service Coat : 5µ microns Epoxy/
  • Top Coat (Expossed Surface) : 18µ to 20µ
  • Bottom Coat : 5µ to 7µ

GALVALUME MILL FINISH (BARE GALVALUME)

  • Material Confirm to : AS 1397
  • Coating On : Cold Rolled Steel
  • Thickness : Standard Thickness of 0.47mm TCT
  • AL-An Coating (GSM) : AZ 150
  • MPa : 245 / 350 / 550 Mpa

PRE PAINTED GALVALUME STEEL SHEETS (PPGL)

  • Material Confirm to : AS 1397
  • Coating On : Galvalume
  • Thickness : Standard Thickness of 0.50mm TCT
  • AL-An Coating (GSM) : AZ 150
  • Paint System : Regular Modified Polyster Paint (RMP) Optional (SMP & PVdF)
  • Mpa : 245 / 350 / 550 Mpa
  • Primer Service Coat : 5µ microns Epoxy/
  • Top Coat (Expossed Surface) : 18µ to 20µ
  • Bottom Coat : 5µ to 7µ

Curved Sheet


Curving through computerised, PLC controlled crimping machine. The minimum radius of curved is 500 mm, start lead is 50mm & end lead is 350 mm. The minimum length of curved is 790mm, thereby making length of curved sheet possible as 1190mm, Length restrictions apply to curved sheets. Curved sheet is high tensile metal is supplied at customers risk.

Available Lengths


Supplied in maximum length up to 12 mtrs.


Limit state wind pressure capacities (kPa)


©2017 God's Steelcon Pvt. Ltd. All rights reserved.

Design By: Maya Creations